Swisher ZT1436 EN User Manual

ZERO TURN HYDROSTATIC DRIVEZERO TURN HYDROSTATIC DRIVEZERO TURN HYDROSTATIC DRIVEZERO TURN HYDROSTATIC DRIVEOWNER’S MANUAL1602 CORPORATE DRIVE, P.O. B

MAINTENANCE SCHEDULEINSPECT BEFORE EACH USE-Loose fasteners: Be sure all fasteners are at proper torque. Especially guards and blades.-Parking brak

INSPECT EVERY 25 HOURS-Lubrication: Grease all pivot points with a high temp grease-Battery, check and clean:Keep battery terminals clean and tight.

SERVICE / ADJUSTMENTSTRACKINGAdjustments to the unit may need to be made if the unit does not track in a straight line. The primary reason for the un

SERVICE / ADJUSTMENTSREMOVING THE MOWER DECK1. Turn off engine and engage parking brake.2. Rotate cutting height lever counterclockwise to lowest cutt

LEVELING THE MOWER DECK1. Position unit on a smooth level surface. 2. For side to side leveling, measure the distance from the floor to the bottom edg

SERVICE / ADJUSTMENTSBELTSClutch drive belt replacement1. Remove belt covers.2. Disconnect tension idler from tension bracket.3. Remove belt from mowe

WIRING DIAGRAMS36” and 42” Mowers50” Mower16

OVERALL ASSEMBLYNot PicturedDescription Part #Solenoid Assembly (All Models) 9043Wiring Harness (36 and 42" Models Only) 3720Wiring Harness (50&

BLADE DRIVER24ENGINE SETUP123456710861112131314151516171892526272829303132Item # Description Part #24 14 HP B&S Engine (36" Mower) N/A17.5 HP

STEERING (RIGHT)DECK LIFT19Item # Description Part #1 Directional Handle Grip 36732 Directional Handle Weldment 3685TK3 5/16-18 X 3/4 Serr Flg Bolt NB

1) Engine Warranty All engines utilized on our products have a separate warranty extended to them by the individual engine manufacturer

SEAT BASE ASSEMBLYSEE CONTROL CARD DETAIL THIS PAGECONTROL CARD15141716Item # Description Part #1 Seat 15" Back No Arm Rest (36" Mower Only)

FRAME for 36” and 42” MowersItem # Description Part # Item # Description Part #1 Beverage Retainer 3643TK 16 1/2-13 Nyloc Nut NB2812 5/16-18 X 1/2 Se

FRAME FOR 50” MOWERItem # Description Part #40 Bumper Weldment 3778TK41 Upper Motor Base 3777TK42 Transmission Mount 3787TK43 Choke Mount 3810TK44 50&

DECK IDLER36” MOWING DECKItem # Description Part #1 Deck Weldment 3750C2 5/16-18 X 3/4 Serr Flg Bolt NB5963 Pulley Cover 37434 5/16-18 Serrated Flange

2442” MOWING DECKSEE DETAIL THIS PAGE1234 567891011121012913141516SEE DETAIL11DECK IDLER28NOT SHOWNDESCRIPTION PART # QTY5/16-18 X 3/4 Serr Flg Bolt N

DECK IDLER1SEE DETAILSEE DETAIL THIS PAGE234151678911107912813814561718Item # Description Part #1 50" ZTR Deck Weldement 3766C2 Pulley Cover (Rig

CORRECTIONCAUSESYMPTOM1. CHECK ANDADJUST TIRE PRESSURE2. SEE TRACKING ADJUSTMENT IN SERVICE SECTION1. IMPROPER AIR PRESSURE2. TRACKING ADJUSTMENTS OUT

27

OWNER’S MANUALMODEL NO.ZT1436ZT17542BZT1842ZT20050Each mower has its own model number. Each engine has its own model number. The model number for th

3Thank you for choosing Swisher’s ZTR Mower. Before operating your mower, please read, understand and follow all of the safety precautions and other

• Read the manual. Learn to operate this machine safely.• Always disconnect the spark plug wire and place the wire where it cannot contact the spark

5CAUTION!Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mow

WARNING: Hydraulic fluid can cause severe burns and penetrate skin causing severe injury or death.• Do not step on mower deck when operating, dismoun

SAFETY PRECAUTIONS & DECALSDanger/Warning Decal – OD99155Ignition/PTO/Throttle Decal – OD99154Parking Brake Decal – OD99152Flying Debris Decal – O

OPERATING YOUR NEW ZTR MOWER (cont.)CONTROLS●OPERATOR PRESENCE SYSTEM:This mower is equipped with an operator’s presence system. Any attempt to leave

OPERATING YOUR NEW ZTR MOWER (cont.)MOWING• WARNING: Do not operate mower at too fast of a rate. Sudden movements forward and backward at fast speeds